|
Epoxies from System Three |
|
Why compromise? Why use a general purpose epoxy resin and endless tubs of fillers to get the epoxy compounds you need? Let our products take the guess work out of epoxy work and instead choose systems optimised for the job you want to do. Whether you are laminating, fairing, filleting or glueing, we have an epoxy designed for the job in hand.
Laminating  | Silvertip Laminating Resin - No amine blush
- Med-low viscosity
- Optimised for coating and fibreglassing wooden boats and repair of fibreglass
- Easy mixed 2:1 ratio
- Fast and Slow hardeners
"Silvertip Laminatng Resin...really is a joy to use" Jake Kavanagh, Practical Boat Owner April 2008. | 
| Clear Coat - Extremely low viscosity
- No amine blush
- Water-clear finish
- Cures to a brilliantly clear, very tough finish
- Ideal for clear coating wood
- Use as the base for clear linear polyurethane or varnish coatings
- Use as a penetrating first coat for blister repair on fiberglass boats
|
Fairing and Filleting
 | QuikFair
- QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance.
- Fillers mixed in at the factory.
- Hand-sand in 3 hours or machine sand in 4.
|  | EZ Fillet
- Wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction
- Colour coded parts mix to a rich brown wood tone to indicate complete mixing.
- Superior strength and workability
- Create smooth cosmetic or structural fillets
- Stays put and will not run or sag
|
Epoxy Adhesives
 | GelMagic
- Two self-leveling liquids, which immediately form a soft, thixotropic, non-sagging paste when mixed.
- Requires no additional modification with fillers
- Can be applied to vertical and overhead surfaces without running
- Exhibits exceptionally high peel strength
- Ideal for stitch and glue, plywood, strip built and glued lap strake construction
- High strength, gap filling, waterproof adhesive for general woodworking and architectural applications.
|  | MetlWeld
- Super tough epoxy adhesive
- Pre-thickened - no additional fillers or bulking agents are needed to make it a non-sagging adhesive.
- MetlWeld will bond metals to metal, wood, stone, concrete, and even glass
|
 | T-88 Structural Epoxy Adhesive
- High-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions
- May be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage.
- T-88 is clear amber and becomes virtually invisible when varnished
- For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States.
- Will not stain wood and is immune to fungus and rot.
- T-88 is unique in that if may be applied to damp wood, provided the adhesive is worked well into the surface.
| 
| Quick Cure 5 - Standard quick setting "five minute epoxy" system
- Mixes in a 1:1 ratio
- Water resistant and ideal for all small jobs requiring a strong bond and rapid cure
|
|
|
|
